Marine First Aid Level 4 (VTQ)

205 videos, 10 hours and 7 minutes

Course Content

Oxygen Regulators

Video 68 of 205
1 min 50 sec
English
English
Want to watch this video? Sign up for the course or enter your email below to watch one free video.

Unlock This Video Now for FREE

This video is normally available to paying customers.
You may unlock this video for FREE. Enter your email address for instant access AND to receive ongoing updates and special discounts related to this topic.

Guide to Oxygen Regulators

This guide offers an in-depth look at oxygen regulators, covering both conventional and pin index systems, and their application in medical and diving scenarios.

Conventional Oxygen Regulators

Typically found atop oxygen cylinders, conventional regulators are commonly used in medical settings. These regulators generally have a standard output of 15 litres per minute.

Pin Index System and Separate Regulators

Pin index systems, often with separate regulators, can offer higher outputs, up to 25 litres per minute. This is particularly relevant in scuba diving, where higher oxygen flow rates are needed.

Adjusting the Flow on Regulators

To adjust the oxygen flow rate, use the knob on the regulator. The gauge indicates the pressure in the cylinder. Ensure proper alignment of locator pins and the oxygen outlet for correct setup.

Setting up the Regulator

To attach the regulator, line up the pins and locator pin accurately, and then tighten it just enough to secure it in place. It is important not to overtighten to avoid damage.

Operating the Oxygen Cylinder

Once the regulator is set up, turn on the cylinder. The gauge will indicate the pressure level. Open the valve fully, then slightly back for safety. The oxygen can then be controlled and delivered to the required system.

Tips for Safe and Effective Use

Always ensure the regulator is securely attached without being overtightened. Regular checks of the setup are important to confirm that everything is functioning correctly.

Note: This guide is for informational purposes. Proper training and safety procedures should always be followed when handling oxygen regulators.